Problems With Oracle Solaris And Workarounds; Problems That Might Occur In Any Versions Of Oracle Solaris And Workarounds - Fujitsu M10 Product Notes

Hide thumbs Also See for M10:
Table of Contents

Advertisement

Table 3-21     Problems resolved in versions prior to XCP 2050 (continue d)
SPARC M10-
RTI No.
1
4
4S
RTIF2-
x
130612-001
Problems with Oracle Solaris and
Workarounds
This section describes problems with Oracle Solaris and workarounds for each version.
Problems that might occur in any versions of
Oracle Solaris and workarounds
The following table lists the problems that might occur in any versions of Oracle
Solaris being supported and workarounds for them.
Table 3-22     Problems that might occur in any versions of Oracle Solaris and workarounds
SPARC M10-
Bug
1
4
4S
15813959
x
x
x
15813960
(7196117)
17561541
x
x
x
18502702
x
x
x
Description
If the XCP firmware version is XCP 2041,
XCP 2042, or XCP 2043, SPARC M10-4S
cannot be replaced by using the
replacefru(8) command in a system with
more than one SPARC M10-4S.
Description
When a PCI expansion unit is added by
hotplug(1M) in a SPARC M10 system,
devices on the PCI expansion unit are not
recognized.
In an environment with XCP 2230 or later
is applied, if the ldm add-io command is
executed after executing the ldm
remove-io command during delayed
reconfiguration, the ldmd daemon may
dump core and restart.
If the SunVTS 7.0 ps17. 1 test is started on
a SPARC M10 system with SPARC64 X+
processors, it may end with an error.
Workaround
Perform cold replacement (replacement
performed with the input power off) or
update the XCP firmware version to XCP
2044 or later before performing
replacement.
Workaround
Before you add a PCI expansion unit by
hotplug(1M), add the following line in
the /etc/system file in advance and restart
Oracle Solaris.
set pcicfg:pcicfg_slot_busnums = 4
This has been modified with SRU11.2.8
and Oracle VM Server for SPARC 3.2 for
Oracle Solaris 10.
During delayed reconfiguration, execute
the ldm remove-io command after
executing the ldm add-io command.
This has been modified with SRU11.2.1.5.
0, and the patch 151265-03 for Oracle
Solaris 10.
Chapter 3 Information on Software
159

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc m10

Table of Contents