Fujitsu M10 Product Notes page 189

Table 3-25 Problems resolved in Oracle Solaris 11.2 (continued)
SPARC M10-
Bug 1 4 4S
18112775 x x x
- x x x
Description
When "Oracle VM Server for SPARC
3.1.0.1/SRU11.1.14" is installed on the
control domain, if dynamically assigned
memory is reduced from a guest domain,
which is running Oracle Solaris 10, with
the "ldm set-memory" or the "ldm
remove-memory" command, the
ldmd(1M) command on the control
domain may produce a core dump and it
may be restarted.
If Java VM is started on a SPARC M10
system with SPARC64 X+ processors, the
following message may be output along
with the production of a core dump.
[Example of message]
#
# Internal Error (output.cpp:1576),
pid=1310, tid=91
# guarantee((int)(blk_starts[i+1] -
blk_starts[i]) >= (current_offset -
blk_offset)) failed: shouldn't increase
block size
#
<...>
#
Abort (core dumped)
Moreover, due to the production of the
core dump by Java VM, the following
events may occur:
1. On a SPARC M10 system with
SPARC64 X+ processors, the "Add
Asset" operation on Solaris fails.
2. On a SPARC M10 system with
SPARC64 X+ processors, installation of
Solaris (the "Install Server" feature) fails.
3. On a SPARC M10 system with
SPARC64 X+ processors, installation of
Enterprise Controller and Proxy
Controller (Ops Center management
server) on the domains fail.
Workaround
This has been modified with SRU11.1.17.
5 and the patch 150817-02 for Oracle
Solaris 10.
Check the memory size that has been
assigned to a logical domain with the
"ldm list-domain" command and reduce
it to the required size in several steps,
using the "ldm remove-memory"
command. It is recommended to reduce
memory size by less than 256 MB at one
time, but memory may also be reduced
by a larger amount at one time.
Meanwhile, the reduction may fail due to
the occurrence of the same symptom
while performing this action. In such a
case, reduce the memory in smaller units.
This has been modified with SRU11.1.17.5.
Chapter 3 Information on Software 175