Fujitsu M10 Product Notes page 179

Table 3-22 Problems that might occur in any versions of Oracle Solaris and workarounds (continued)
SPARC M10-
Bug 1 4 4S
- x x x
- x x x
Description
When "Oracle VM Server for SPARC
3.1.1.1" is installed on the control domain,
messages like the following will be
registered to the log file (/var/svc/log/
ldoms-ldmd:default.log) of the
ldoms/ldmd service.
[Example of the messages]
Get Device ID command failed:
Unknown (0x7E)
ERROR: Cannot connect to BMC
No response time from the migration
source domain may become long because
a different process from the original live
migration is performed during live
migration. Network services and the like
operating on the migration source
domain may time out because of no
response.
This case occurs if the migration source
domain meets both of the following
conditions.
- The difference between the maximum
RA of the migration source domain
(actual address) and its minimum RA
cannot be divided by 64 MB
- The remainder is 32 MB or less when
the difference between the maximum
RA of the migration source domain and
its minimum RA is divided by 64 MB
The maximum RA and the minimum RA
of the domain can be checked with the
following command.
[Example]
# ldm list-domain -o memory domain-
name
NAME
domain-name
MEMORY
RA PA SIZE
0x10000000 0x7b0fc0000000 1G
minimum RA
0x400800000 0x7f01a0800000 11G
(a) (b)
The maximum RA is the sum of (a) + (b),
which will be 0x6c0800000.
0x400800000 + 0x2c0000000(11G) =
0x6c0800000
The difference between the maximum
RA and the minimum RA is 27400 MB.
0x6c0800000 - 0x10000000 = 0x6b0800000
Workaround
There is no effective workaround.
As this error message has no effect on the
functioning of the system, ignore it.
There is no effective workaround.
Chapter 3 Information on Software 165