Fujitsu M10 Product Notes page 39

4.
Specify false for the OpenBoot PROM environment variable auto-boot?,
execute the setpparparam(8) command, and disable the autoboot function of
the control domain.
XSCF> setpparparam -p xx -s bootscript "setenv auto-boot? false"
PPAR-ID of PPARs that will be affected:xx
OpenBoot PROM variable bootscript will be changed.
Continue? [y|n]:
5.
Execute the poweron(8) command to power on the target physical partitions.
XSCF> poweron -p xx
DomainIDs to power on: xx
Continue? [y|n] : y
xx :Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs
power".
XSCF>
6.
Execute the console(8) command to switch to the console of the control
domain.
XSCF> console -p 0
:
omitted
{0} ok
7.
Execute the boot -s command to start Oracle Solaris in single-user mode.
{0} ok boot -s
8.
Execute the date(1M) command of Oracle Solaris to display the control
domain time.
9.
Set the control domain time by executing the date(1M) command.
# date xxxx
10. Enter the escape command such as ".#" from the control domain console of
the physical partition, and return to XSCF shell.
11. Execute the showdate(8) command to display the XSCF time to confirm that
the control domain time of the target physical partition is the same as the
clock time of XSCF.
12. If necessary, specify true for OpenBoot PROM environment variable
auto-boot?, Execute the setpparparam(8) command, and enable the autoboot
Chapter 2 XCP 2240-Related Information 25