Fujitsu M10 Product Notes page 214

XSCF> ioxadm [ -fvAM ] serial target serial_num
For target, specify the identifier of the target PCI expansion unit. In this case,
"PCIBOX#0000" is specified. For serial_num, specify the serial number of the PCI
expansion unit before the change in the format of "nnnnnnnnnn". The serial number
is found on the label on the chassis of the PCI expansion unit.
This command replaces the serial number and identifier of the PCI expansion unit.
By executing the ioxadm -v list command, you can confirm that the serial number
and identifier have been replaced.
In the following example, the serial number of the PCI expansion unit is "2121212006".
XSCF> ioxadm serial PCIBOX#0000 2121212006
XSCF> ioxadm -v list
Location Type FW Ve Serial Num Part Num State
PCIBOX#2006 PCIBOX - 2121212006 On
PCIBOX#2006/PSU#0 PSU - FEJD1201000170 CA01022-0750-D/ On
PCIBOX#2006/PSU#1 PSU - FEJD1245001342 CA01022-0750-D/7060988 On
PCIBOX#2006/IOB IOBOARD 1110 PP121001JM CA20365-B66X 007AF On
PCIBOX#2006/LINKBD BOARD - PP123300TR CA20365-B60X 001AA On
PCIBOX#2006/FANBP FANBP - PP120904SY CA20365-B68X 004AC On
BB#00-PCI#00 CARD 1110 On
XSCF>
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ･ March 2015
200