Miscellaneous Problems; Power-On Indicator Remains Dark; The Server Switches Itself Off; The Monitor Remains Dark - Fujitsu PRIMERGY RX800 S2 Operating Manual

Miscellaneous Problems

5.2 Miscellaneous Problems
5.2.1

Power-on Indicator Remains Dark

The power-on indicator remains dark after switching ON:
Power cable not connected correctly
Ê Make sure that the power cables are correctly connected to the server and
to the grounded power sockets.
Power supply overloaded
Ê Pull the server power plugs out of their sockets.
Ê Wait a few seconds and plug the power plugs into their grounded sockets
again.
Ê Switch your server ON.
5.2.2

The Server Switches itself OFF

Server management has detected an error
Ê Check the error list or the ErrorLog file in the ServerView program, and
attempt to eliminate the error.
5.2.3

The Monitor Remains Dark

Monitor is switched OFF
Ê Switch ON your monitor.
Power saving has been activated (screen is blank)
Ê Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver). Enter the appropriate password.
98
Troubleshooting and Tips
U41621-J-Z156-1-76