Xml: Import Configuration; To Import Configuration In Xml Format; Table 14-7 Import Configuration From Filesystem Settings - Lantronix PremierWave XC HSPA+ User Manual

Using XML
Not applicable.


XML: Import Configuration

Here you can import a system configuration from an XML file.
The XML data can be imported from a file on the file system or pasted into a CLI session. The
groups to import can be specified at the command line, the default is all groups.
Import Configuration from External File
This import option requires entering the path and file name of the external XCR file you want to
import.
Import Configuration from the Filesystem
This import option picks up settings from a file and your import selections of groups, lines, and
instances. The list of files can be viewed from the filesystem level of the CLI.
Line(s) from single line Settings on the Filesystem
This import option copies line settings from an the input file containing only one Line instance to all
of the selected Lines.

Table 14-7 Import Configuration from Filesystem Settings

Import Configuration
from Filesystem Settings
Filename
Lines to Import
Whole Groups to Import
Text List

To Import Configuration in XML Format

Using Web Manager
To import configuration, click XML in the menu and select Import Configuration.

Using the CLI
To enter the XML command level: enable -> xml

PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT
Description
Enter the name of the file on the PremierWave (local to its filesystem) that
contains XCR data.
Select filter instances to be imported in the line, serial, tunnel and terminal
groups. This affects both Whole Groups to Import and Text List selections.
Select the configuration groups to import from the XML configuration record.
This option imports all instances of each selected group.
Enter the string to import specific instances of a group. The textual format of
this string is:
<g>:<i>;<g>:<i>;...
Each group name <g> is followed by a colon and the instance value <i> and
each <g>:<i> value is separated by a semi-colon. If a group has no instance
then only the group name <g> should be specified.
PRELIMINARY DRAFT
14: Advanced Settings
89