To Configure Network 2 (Cellular Interface) Settings; Network 2 (Link) Settings - Lantronix PremierWave XC HSPA+ User Manual

Network 2 (Cellular
Interface) Settings
Connection Mode
Idle Timeout
Primary DNS
Secondary DNS
Server

To Configure Network 2 (Cellular Interface) Settings

Using Web Manager
To modify network 2 cellular interface information, click Network on the menu and select

Network 2 > Interface > Configuration.
Using the CLI
To enter the cellular command level: enable -> config -> if 2

Using XML
Include in your file: <configgroup name = "cellular interface" instance =

"wwan0">

Network 2 (Link) Settings

This page shows configuration of an Cellular Link on the device.
Network 2 Link
Settings
APN (Access Point
Name)
Username
Password
Dialup String
Roaming
PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT
Description
The Always On connection mode keeps the device always connected to the
cellular network. The On Demand connection mode leaves the link quiescent until
an application attempts to make use of the cellular network connection. Be aware
that in this mode, the first attempt to initiate a connection from the device server
may fail, since a new IP address may need to be negotiated. The Shoulder Tap
connection mode requires a short message (SMS) to make the link active. See
the SMS Inbound configuration for details on the message syntax requirements.
If the connection mode is 'On Demand' or 'Shoulder Tap' and there is no network
activity for Idle Timeout duration the device will automatically disconnect from the
cellular network.
Enter the IP address of the primary Domain Name Server.
Note: This setting will be used when either Static IP or Auto IP is active, or if
DHCP/BOOTP is active and no DNS server was acquired from the server.
Enter the IP address of the secondary Domain Name Server.
Note: This setting will be used when either Static IP or Auto IP is active, or if
DHCP/BOOTP is active and no DNS server was acquired from the server.
Description
Enter the configurable network identifier used by a mobile device when
connecting to a GSM carrier.
Enter the Username for dial up to cellular carrier, if required.
Enter the Password for dial up to cellular carrier, if required.
Enter the modem string used for making connection to carrier.
Enable or disable the network roaming.
PRELIMINARY DRAFT
6: Network Settings
36