Command Line Interface Settings; Basic Cli Settings; To View And Configure Basic Cli Settings; Table 14-2 Cli Configuration Settings - Lantronix PremierWave XC HSPA+ User Manual

Using the CLI
To enter Email command level: enable -> email 1

Using XML
Include in your file: <configgroup name="email" instance="1">


Command Line Interface Settings

The Command Line Interface settings allow you to control how users connect to and interact with
the PremierWave's command line. It is possible to configure access via the Telnet and SSH
protocols, in addition to general CLI options.

Basic CLI Settings

The basic CLI settings control general CLI access and usability options.
Command Line Interface
Configuration Settings
Login Password
Enable Level Password
Quit Connect Line
Inactivity Timeout
Line Authentication

To View and Configure Basic CLI Settings

Using Web Manager
To view CLI statistics, click CLI in the menu and select Statistics.

To configure basic CLI settings, click CLI in the menu and select Configuration.

Using the CLI
To enter CLI command level: enable -> config -> cli

Using XML
Include in your file: <configgroup name="cli">

PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT

Table 14-2 CLI Configuration Settings

Description
Enter the password for logins by the admin account. The default password is
"PASS".
Enter the password for access to the Command Mode Enable level. There is
no password by default.
Enter the Quit Connect Line string to be used to terminate a telnet or SSH
session and resume the CLI. Type <control> before the key to be pressed
while holding down the [Ctrl] key (example: <control>L)
Set a time period in which the CLI session should disconnect if no data is
received. Enter 0 to disable. Blank the display field to restore the default.
Enable or Disable authentication for CLI access on the .
PRELIMINARY DRAFT
14: Advanced Settings
85