Snmp Settings; To Configure Snmp Settings; Sms; Inbound Sms - Lantronix PremierWave XC HSPA+ User Manual

SNMP Settings

Simple Network management Protocol (SNMP) settings may be viewed and configured in this
section.
RSS Settings
System Location
Primary Destination
Secondary
Destination
Community

To Configure SNMP Settings

Using Web Manager
To configure SNMP, click SNMP in the menu.

Using the CLI
To enter the SNMP command level: enable -> config -> snmp

Using XML
Include in your file: <configgroup name="snmp">


SMS

Allows the user to view and configure inbound/outbound SMS to/from the device.

Inbound SMS

Inbound SMS Settings
Delete
Number
Shoulder Tap
Relay Control
PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT

Table 11-7 SNMP Settings

Description
Specify a system location for the SNMP setting.
Specify SNMP trap primary destination.
Specify SNMP trap secondary destination.
Specify SNMP trap community.

Table 11-8 Inbound SMS Settings

Description
Click beside an existing SMS Sender Configuration to delete it.
Enter the sender number of a new SMS Sender to add.
Check to allow incoming SMS with content containing 'shoulder tap' from this
sender to start the cellular interface.
Check to allow incoming SMS with content containing 'relay N On/Off' from this
sender to open and close the device relays.
PRELIMINARY DRAFT
11: Services Settings
64