To Configure Ftp Settings; Syslog Settings; To View Or Configure Syslog Settings; Table 11-3 Syslog Settings - Lantronix PremierWave XC HSPA+ User Manual

To Configure FTP Settings

Using Web Manager
To configure FTP, click FTP in the menu.

Using the CLI
To enter the FTP command level: enable -> config -> ftp

Using XML
Include in your file:


Syslog Settings

The Syslog information shows the current configuration and statistics of the syslog. Here you can
configure the syslog host and the severity of the events to log.
Note: The system log is always saved to local storage, but it is not retained through
reboots unless diagnostics logging to the filesystem is enabled. Saving the system log to a
server that supports remote logging services (see RFC 3164) allows the administrator to
save the complete system log history. The default port is 514.
Syslog Settings
State
Host
Remote Port
Severity Log Level

To View or Configure Syslog Settings:

Using Web Manager
To configure the Syslog, click Syslog in the menu.

Using the CLI
To enter the Syslog command level: enable -> config -> syslog

PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT
<configgroup name="ftp server">

Table 11-3 Syslog Settings

Description
Select to enable or disable the syslog:
 Enabled
Disabled (default)

Enter the IP address of the remote server to which system logs are sent for storage.
Enter the number of the port on the remote server that supports logging services.
The default is 514.
Specify the minimum level of system message the PremierWave should log. This
setting applies to all syslog facilities. The drop-down list in the Web Manager is in
descending order of severity (e.g., Emergency is more severe than Alert.)
PRELIMINARY DRAFT
11: Services Settings
60