Telnet Settings; To Configure Telnet Settings; Ssh Settings; Table 14-3 Telnet Settings - Lantronix PremierWave XC HSPA+ User Manual

Telnet Settings

The telnet settings control CLI access to the PremierWave over the Telnet protocol.
Telnet Settings
Telnet State
Telnet Port
Telnet Max Sessions
Telnet Authentication

To Configure Telnet Settings

Using Web Manager
To configure Telnet settings, click CLI in the menu and select Configuration.

Using the CLI
To enter the Telnet command level: enable -> config -> cli -> telnet

Using XML
Include in your file:

<configgroup name="telnet">
and
<configitem name="state">
and
<configitem name="authentication">

SSH Settings

The SSH settings control CLI access to the PremierWave over the SSH protocol.
SSH Settings
SSH State
SSH Port
SSH Max Sessions
PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT

Table 14-3 Telnet Settings

Description
Enable or Disable CLI access via telnet
Enter an alternative Telnet Port to override the default used by the CLI server.
Blank the field to restore the default.
Specify the maximum number of concurrent Telnet sessions that will be allowed.
Enable or Disable authentication for telnet logins.

Table 14-4 SSH Settings

Description
Select to Enable or Disable CLI access via telnet.
Specify the SSH Port and override the default, as needed. Blank the field to
restore the default.
Specify the maximum number of concurrent SSH sessions that will be allowed.
PRELIMINARY DRAFT
14: Advanced Settings
86