Troubleshooting Capabilities; Configuration Methods - Lantronix PremierWave XC HSPA+ User Manual

ARP, HTTP, HTTPS, SMTP AUTH, SNMP v1/v2c/v3, Modbus TCP, UDP/IP, TCP/IP, SSH,

SSL, TLS, RSS, UPnP, ICMP, BOOTP, DHCP, Auto IP, Telnet, SNTP, FTP, FTPS, DNS,
TFTP, XML and Syslog for network communications and management.
TFTP for uploading/downloading files.

FTP and HTTP/HTTPS web server for firmware upgrades and uploading/downloading files.

TCP/IP, UDP/IP, Telnet, SSH, SSL, TCP AES and UDP AES for command/response based

data acquisition application or alarm triggered connection
HTTP/HTTPS web based monitoring of input readings, chart and data logging

SMTP AUTH, HTTP/HTTPS Post, FTP/FTPS Put and SNMP Traps for alarm triggered

notification
SNTP for device clock synchronization

SMS for alarm triggered notification.


Troubleshooting Capabilities

The PremierWave XC HSPA+ offers a comprehensive diagnostic toolset that lets you troubleshoot
problems quickly and easily. Available from the CLI or Web Manager, the diagnostic tools let you:
View memory and IP socket information.

Perform ping and traceroute operations.

Conduct forward or reverse DNS lookup operations.

View all processes currently running on the PremierWave, including CPU utilization.

View system log messages.


Configuration Methods

After installation, the PremierWave requires configuration. For the unit to operate correctly on a
network, it must have a unique IP address on the network. There are four basic methods for
logging into the PremierWave and assigning IP addresses and other configurable settings:
Web Manager: View and configure all settings easily through a web browser using the

Lantronix Web Manager.
DeviceInstaller: Configure the IP address and related settings and view current settings on

the PremierWave using a Graphical User Interface (GUI) on a PC attached to a network. You
will need the latest version of
Command Mode: There are two methods for accessing Command Mode (CLI): making a

Telnet or SSH connection, or connecting a PC or other host running a terminal emulation
program to the unit's USB port. (See the PremierWave XC HSPA+ Command Reference
Guide for instructions and available commands.)
XML: The PremierWave supports XML-based configuration and setup records that make

device configuration transparent to users and administrators. XML is easily editable with a
standard text or XML editor. (See the PremierWave XC HSPA+ Command Reference Guide
for instructions and commands.)
PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT
(See "Configuration Using Web Manager" on page
DeviceInstaller.
PRELIMINARY DRAFT
(See "Using DeviceInstaller" on page
2: Introduction
27.)
25.)
15