Certificate Upload Settings; To Configure An Existing Ssl Credential; Table 12-6 Upload Certificate Settings - Lantronix PremierWave XC HSPA+ User Manual

Certificate Upload Settings

SSL certificates identify the PremierWave to peers. Certificate and key pairs can be uploaded to
the PremierWave through either the CLI or XML import mechanisms. Certificates can be identified
on the PremierWave by a name provided at upload time.
Upload
Certificate
Settings
New Certificate
New Private Key

To Configure an Existing SSL Credential

Using Web Manager
To configure an existing SSL Credential, click SSL in the menu and select Credentials.

Using the CLI
To enter the SSL command level: enable -> ssl

To enter the Credential command level: enable -> ssl -> credentials

Using XML
Include in your file:

<configgroup name="ssl">
and <configitem name="credentials" instance="name">
and <value name="RSA certificate"/> or <value name="DSA certificate"/>
PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT

Table 12-6 Upload Certificate Settings

Description
SSL certificate to be uploaded.
RSA or DSA certificates are allowed.
The format of the certificate must be PEM. It must start with "
CERTIFICATE----- " and end with "
Certificate Authorities add comments before and/or after these lines. Those need to be
deleted before upload.
The key needs to belong to the certificate entered above.
The format of the file must be PEM. It must start with "
PRIVATE KEY----- " and end with "
Read DSA instead of RSA in case of a DSA key. Some Certificate Authorities add
comments before and/or after these lines. Those need to be deleted before upload.
PRELIMINARY DRAFT
12: Security Settings
-----BEGIN
-----END CERTIFICATE-----
-----BEGIN RSA
-----END RSA PRIVATE KEY-----
". Some
".
71