To Configure Tunnel Modem Emulation Settings - Lantronix PremierWave XC HSPA+ User Manual

Tunnel Modem
Emulation Settings
(continued)
Echo Commands
Verbose Response
Response Type
Error Unknown
Commands
Incoming Connection Set how and if requests are answered after an incoming RING (ATS0=2). Choices
Connect String
Display Remote IP

To Configure Tunnel Modem Emulation Settings

Using Web Manager
To configure the Modem Emulation for a specific tunnel, click Tunnel in the menu and select

Tunnel 1 -> Modem Emulation.
Using the CLI
To enter the Tunnel 1 Modem command level: enable -> tunnel 1 -> modem

Using XML
Include in your file:

PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT
Description
Set whether characters read on the Serial Line will be echoed, while the Line is in
Modem Command Mode. Choices are:
Enabled

 Disabled (default)
Set whether Modem Response Codes are sent out on the Serial Line. Choices are:
 Enabled
Disabled (default)

Select a representation for the Modem Response Codes sent out on the Serial
Line. Choices are:
 Text (ATV1) (default)
 Numeric (ATV0)
Set whether the Error Unknown Commands is enabled (ATU0) and ERROR is
returned on the Serial Line for unrecognized AT commands. OTherwise (ATU1)
OK is returned for unrecognized AT commands. Choices are:
 Enabled
Disabled (default)

are:
 Disabled (default)
Automatic

Manual

Enter the customized Connect String sent to the Serial Line with the Connect
Modem Response Code.
Set whether the Display Remote IP is enabled so that the incoming RING sent on
the Serial Line is followed by the IP address of the caller. Choices are:
Enabled

 Disabled (default)
<configgroup name="tunnel modem" instance="1">
PRELIMINARY DRAFT
9: Line and Tunnel Settings
54