Table of Contents
Advertisement
Date / Time
The Choose file to Upload dialog will be displayed.
5
Navigate to the location where the firmware file has been saved.
6
Select the firmware file then select the Open button.
7
Select Upload.
The file transfer will begin. Do not disconnect power to the camera during the upgrade process. The
camera restarts automatically after the updates have been completed, this can take from 1 to 10
minutes.
The Log in page will be displayed.
Refer to Procedure 3-1 Log in to the Camera on page 3-10 to log back into the camera Web User
Interface.
Date / Time
Set the date and time on the camera.
Note:
Date and Time can also be configured in the Quick Start menu.
Procedure 10-6 Configuring the Date and Time
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select the Date Time from the System menu.
3
Select the Time 24-hour check box to enable the 24-hour clock.
Or
Deselect the Time 24-hour check box to enable the 12-hour clock.
The default setting is '24-hour'.
4
Select the Date Display Format from the drop-down menu:
• DD/MM/YYYY
• MM/DD/YYYY
• YYYY/MM/DD
The default setting is 'YYYY/MM/DD'.
5
Select the Time Zone from the drop-down menu.
The default setting is '(GMT-05:00) Eastern Time (US & Canada)
6
Select the Set Time setting by selecting the radio buttons:
• Manually
96
- End -
Hide quick links:
Advertisement
Table of Contents
