Illustra IPS02D0OCWTT Configuration And User's Manual page 89

Dynamic DNS
The default setting is 'Disabled'.
Note:
When in Enhanced Security mode, enabling CIFS requires the admin account password.
4 Enter the network path in the Network Path text box.
Note:
When entering the network path the following format should be used '//<IP Address>/<folder name>'
5 Enter the domain name in the Domain Name in the text box.
6 Enter the username in the Username text box.
7 Enter the password h in the Password text box.
Dynamic DNS
Dynamic DNS is supported for updating, in real time a changing IP address on the Internet to provide a persistent
domain name for a resource that may change location on the network. RFC 2136 Dynamic Updates in the Domain
Name System. In this situation the camera talks only to the DHCP server and the DHCP server is responsible for
updating the DNS server. The camera sends its hostname to the DHCP server when requesting a new lease and
the DHCP server updates the DNS records accordingly. This is suitable for an intranet style configuration where
there is an internal DHCP and DNS service and the user wants only to access their camera within their own
network.
By default, when making a DHCP request the camera will transmit its hostname as part of the DHCP request.
This option is not user configurable. The cameras hostname matches the configurable parameter "camera name"
on the Web User Interface. Any DHCP request will contain the cameras hostname for use of the DHCP server to
forward to an appropriate DNS server.
Dynamic DNS
Configure the Dynamic DNS settings for the camera.
Procedure 9-9 Configure Dynamic DNS
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Dynamic DNS from the Network menu.
3 Select the Service Enable check box to enable Dynamic DNS.
OR
Deselect Service Enable check box to disable Dynamic DNS.
The default setting is 'Disabled'.
4 If Service Enable has been enabled:
a Enter the Camera Alias in the text box.
89
- End -