Remote Access
Editing an Address Filter
Edit an existing address filter.
Procedure 8-16 Edit an Address Filter
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Firewall from the Security menu.
3
Select the Address Filtering tab.
4
Edit the IP or MAC Address in the IP or MAC Address text box.
5
Select Add to save the changes.
Deleting an Address Filter
Delete an existing address filter.
Procedure 8-17 Delete an Address Filter
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Firewall from the Security menu.
3
Select the Address Filtering tab.
4
Select to
Remote Access
SSH Enable
Enables Secure Shell access into the camera, if remote access is permitted by the camera network. This will also
enable Tyco Security Products Level 3 Technical Support to diagnose any problems on the camera.
Note:
It is recommended to keep SSH Enable disabled. This function should only be enabled this when it is requested
by Tyco Security Products Level 3 Technical Support.
80
delete the corresponding address filter.
- End -
- End -