Illustra IPS02D0OCWTT Configuration And User's Manual page 53

Event Actions
Deselect the Output check box to disable alarm output.
6 Select the required configured fault action from the Action drop down menu.
Procedure 5-9 Enable/Disable an Alarm
Step Action
1 Select Alarm I/O from the Event and Actions menu.
2 Select the Enabled check box to enable the corresponding alarm.
OR
Deselect the Enabled check box to disable the corresponding alarm.
Enable or Disable Alarm Output
Alarm Output allows the alarm to activate a digital output as an action. For example, this digital output could be
linked to an electrical device, i.e. a security light or siren.
Procedure 5-10 Enable/Disable Alarm Output
Step Action
1 Select Alarm I/O from the Event and Actions menu.
2 Select the Output check box to enable alarm output.
OR
Deselect the Output check box to disable alarm output.
Procedure 5-11 Clearing Alarm Output
Step Action
1 Select Alarm I/O from the Event and Actions menu.
2 Under Alarm Output, select the Apply button to Clear Active Output.
The Alarm Output is cleared.
53
- End -
- End -
- End -
- End -