Illustra IPS02D0OCWTT Configuration And User's Manual page 102

About
Procedure 10-17 Boot Log Filter
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Logs from the System menu.
3 Select the Boot Log tab.
4 Enter the number of lines of the log file you would like to view in the Lines text box.
5 Enter the word or phrase that you would like to search for in the Filter text box.
6 Select Refresh to refresh the log for the most up-to-date information.
Audit Log
The Audit Log will log details obtained when anything is logged are source, class, result, user and a description of
the change.all changes that have been made in the following areas of the Web User Interface as outlined below:
• Changes in FTP, CIFS, SMTP, IPV4, IPV6, DNS and SNMP are logged under class NETWORK.
• Changes in Stream are logged under class VIDEO.
• Changes in Reboot, Reset and Upgrade are logged under class MAINTENANCE.
• Changes in DIO and ROI are logged under EVENT.
About
The About menu provides the following camera information:
• Camera Name
• Model
• Product Code
• Manufacturing Date
• Serial Number
• MAC Address
• Firmware Version
• Hardware Version
Procedure 10-18 Display Model Information
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
102
- End -
- End -