Event Logs
Procedure 5-26 Delete Current Faults
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Event Logs from the Events and Actions menu.
3
Select the Fault Log tab.
4
Select the corresponding Delete check box to mark the fault for deletion.
OR
Deselect the corresponding Delete check box to keep the fault.
Note:
You can select the Select All check box to mark all faults displayed in the list for deletion.
5
Select Delete to delete the selected faults.
You are prompted to confirm the deletion.
6
Select OK to confirm the deletion.
OR
Select Cancel.
64
- End -