Table of Contents
Advertisement
Picture Additional
• Spot - exposure calculations are based on the very center of the image.
• ROI Weighted - exposure calculations are based on a region of interest selected.
The default setting is Center Weighted.
5
Select the Exposure Offset (F-Stops) from the drop-down menu.
The default setting is 0.
6
Select the Max Exposure from the drop-down menu.
The default setting is 1/30.
7
Select the Max Gain from the drop-down menu.
The default setting is 0db.
The video pane will update to display the new settings.
Procedure 4-7 Restore Exposure Defaults
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select the Picture Settings tab from the Basic Configuration menu.
3
Select
4
Select Exposure Defaults to restore the default settings.
The default values are:
• Exposure Method: Center Weighted
• Exposure Offset (F-Stops): 0.0
• Max Exposure (sec): 1/4 for 5MP, 1/8 for 3MP and 1/8 for 2MP
• Max Gain (dB): 30db for 5MP, 42db for 3MP and 42db for 2MP
Picture Additional
Configure Wide Dynamic Range, Day Night Mode, Flicker Control and Picture Adjustments including Brightness,
Contrast, White Balance, Saturation and Sharpness displayed in the video pane.
Wide Dynamic Range
Wide Dynamic Range (WDR) is a feature that allows viewing of high contrast scenes that include both bright and
low light areas in the same field of view (FOV).
WDR Level allows you to adjust the WDR level to favour an underexposed or overexposed image. By selecting
the lower end of the control the image is underexposed which provides more detail in areas of bright but less
details in areas of darkness. Selecting the higher end of the control the image is overexposed which provides
more detail in the dark areas but less details in the bright areas.
36
to start the video stream if it is not already active.
- End -
- End -
Hide quick links:
Advertisement
Table of Contents
