Table of Contents
Advertisement
Blur Detection
OR
Deselect the check box of the target Analytics Rule to disable the analytics rule.
Procedure 5-21 Edit an Analytics Rule
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Analytics from the Events and Actions menu.
3
Select the Video Intelligence tab.
4
From the Analytics Rules table, select the edit icon
edit.
5
Edit the settings in the Rule Definition until you are happy with your changes.
6
Select Save to save your changes.
Procedure 5-22 Delete an Analytics Rule
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Analytics from the Events and Actions menu.
3
Select the Video Intelligence tab.
4
From the Analytics Rules table, select the delete icon
to delete.
5
Select OK when you are asked to confirm your action.
6
Select Save to save your changes.
Blur Detection
With blur detection function enabled, when the camera detects incidents that make video image blur, e.g.
redirection, blocking or defocusing, the camera generates an alarm and then take an action you specify
When Blur detection is enabled, it has a polling period of 10 minutes.
A Blur Detection start fault is rraised when blur has been detected at 3 successive poling periods (up to 30
minutes).
61
- End -
across from the analytics rule that you want to
- End -
across from the analytics rule that you want
- End -
Hide quick links:
Advertisement
Table of Contents
