Table of Contents
Advertisement
IR LEDS
Procedure 4-15 Run a Lens Calibration
Step Action
1
Select Setup on the Web Interface Banner to display the setup menus.
2
Select Picture Settings from the Video menu.
3
Select the Lens Calibration tab.
4
Select Start Calibration and wait for the camera lens initialization to complete.
5
Drag the Step 1: Focus at WIDE slider bar up and down until you are satisfied with the picture focus,
and select Apply to apply your changes.
6
Drag the Step 2: Focus at TELE slider bar up and down until you are satisfied with the picture focus,
and select Apply to apply your changes.
7
Drag the Step 3: Re Focus at TELE slider bar up and down until you are satisfied with the picture focus,
and select Apply to apply your changes.
8
To confirm the success of the lens calibration, select the Picture Basic tab from the Picture Settings
menu and verify that the image is in focus through the zoom range.
Use the OneTouch button to automatically focus the area of view highlighted in the yellow box displayed
in the video pane.
IR LEDS
The IR Lens tab allows control of individual IR LEDs on the camera. The IR LEDs can be enabled or disabled
depending on customer needs.
Procedure 4-16 Switch a LED light on or off
Step Action
1
Select Setup on the Web Interface Banner to display the setup menus.
2
Select Picture Settings from the Video menu.
3
Select the IR LEDS tab.
A circle containing dots which represen where the LED lights are located on the camera displays.
4
Use the arrow printed on the lens as a reference point when mapping the LEDS.
5
Click on the LEDS you want to turn on or off.
A red dot means that the LED light is on.
A white dot means that the LED light is off.
The dot changes colour when you click on it and the LED light it represents turns on or off according to
your selection.
41
- End -
- End -
Hide quick links:
Advertisement
Table of Contents
