Illustra IPS02D0OCWTT Configuration And User's Manual page 38

Picture Additional
Procedure 4-9 Enable / Disable IR Illuminator
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional from the Basic Configuration menu.
3 Select the Enable IR Illuminator check box to enable IR Illuminator.
OR
Deselect the Enable IR Illuminator check box to disable IR Illuminator.
The default setting is 'Disabled'.
Day Night Mode
The dome provides a black-and-white (B/W) mode to improve camera performance when the light level falls below
certain thresholds. This allows clear images to be obtained under low-light conditions. There are three Day/Night
settings:Forced Color, Forced B/W and Auto.
Procedure 4-10 Configure Day Night Mode
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional from the Basic Configuration menu.
3 Select a Day Night Mode setting from the drop-down menu:
• Auto Low
• Auto Mid
• Auto High
• Manual
• Force Color - enable full-time color mode.
• Force B/W - enable full-time black and white mode.
• Auto - good balance of Color and BW mode performance.
The default setting is 'Auto Low'.
Picture Adjustment
Adjust brightness, contrast and saturation of the image displayed on the video pane.
Procedure 4-11 Adjust the Brightness, Contrast and Saturation
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional tab from the Basic Configuration menu.
3 Select
38
to start the video stream if it is not already active.
- End -