Illustra IPS02D0OCWTT Configuration And User's Manual page 90

SIP
b Select a Service Provider from the drop-down list:
• dyndns.org
• easydns.com
• no-ip.com
• zerigo.com
• dynsip.org
• tzo.com
c Enter a Username in the text box.
d Enter a Password in the text box.
e Enter Service Data in the text box.
5 Select Apply to save the settings.
SIP
The Session Initiation Protocol (SIP) feature enables the camera to be configured as a SIP User Agent that can
register with a SIP server to make and receive audio calls to another SIP device, for example, a SIP IP phone or
softphone. The camera can operate as a SIP phone if it is equipped with an external microphone and speaker. The
camera can also be configured to monitor the audio from a SIP call and make this available as an RTSP/RTP
stream.
Enable/Disable SIP
Enable/Disable SIP on the camera.
Procedure 9-10 Enable/Disable SIP
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SIP from the Network menu.
3 Check the Enabled check box to enable SIP
OR
Clear the Enabled check box to disable SIP.
The default setting is 'Disabled'.
4 Click Apply to save your settings.
Note:
After you enable SIP, the camera reboots automatically.
90
- End -
- End -