Table of Contents
Advertisement
CIFS
4
Enter an SNMP managing contact reference in the Contact text box.
5
If using V2:
a
Select the Enable V2 checkbox.
b
Enter the authorized ID for reading SNMP data in the Read Community text box.
c
Enter the Trap Community.
d
Enter the Trap Address.
e
Select Apply.
OR
If using V3:
a
Select the Enable V3 checkbox.
b
Enter the Read User.
c
Select the Security Level from the drop down menu:
- noauth: No authentication / no encryption.
- auth: Authentication / no encryption. A user password is required. It is symmetrically encrypted
using either MD5 or SHA.
- priv: Authentication / encryption. A user password is required as is symmetrically encrypted using
either MD5 or SHA. A data encryption password is required as is symmetrically encrypted using
either DES or AES.
d
Select the Authentication Type using the radio buttons.
e
Enter the Authentication Password
f
Select the EncryptionType using the radio buttons.
g
Enter the Encryption Password
h
Select Apply.
CIFS
The CIFS feature permits files generated from the camera such as alarm related video to be directed to network
attached file storage via the Common Internet File System protocol. This supplements existing distribution
methods such as FTP, SFTP and email.
Procedure 9-8 Configure CIFS Server Settings
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select CIFS from the Network menu.
3
Select the Enable check box to enable CIFS.
OR
Deselect the Enable check box to disable CIFS.
88
- End -
Hide quick links:
Advertisement
Table of Contents
