Illustra IPS02D0OCWTT Configuration And User's Manual page 24

Picture Additional
Min. illumination color
(Lux):
Min. illumination b/w
(Lux):
Dynamic range (db)
Procedure 3-14 Enable / Disable IR Illuminator
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional from the Basic Configuration menu.
3 Select the Enable IR Illuminator check box to enable IR Illuminator.
OR
Deselect the Enable IR Illuminator check box to disable IR Illuminator.
The default setting is 'Enabled'.
Day Night Mode
The dome provides a black-and-white (B/W) mode to improve camera performance when the light level falls below
certain thresholds. This allows clear images to be obtained under low-light conditions. There are three Day/Night
settings:Forced Color, Forced B/W and Auto.
Procedure 3-15 Configure Day Night Mode
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional from the Basic Configuration menu.
3 Select a Day Night Mode setting from the drop-down menu:
• Forced Color - enable full-time color mode.
• Forced B/W - enable full-time black and white mode.
• Auto Low- camera will adjust between BW and Color depending on light levels.
• Auto Mid - camera will give a good balance of Color and BW depending on the scene.
• Auto High - increases the chance of switching to BW mode as light levels drop.
• Manual - a slider bar will display, the user can adjust the setting to suit the environment.
The default setting is 'Auto Low'.
Picture Adjustment
Adjust brightness, contrast and saturation of the image displayed on the video pane.
24
0.3 0.4
0.02 0.03
90 90
0.05 0.06
0.003 0.004
96 96
- End -
- End -
0.03 0.04
0.001 0.002
96 96