Event Logs
Event Logs
Event Log
When events are triggered the resulting alarms are displayed in the Event Log with the following information:
• # - details the event index.
• Event - this is listed as 'MotionDetected'.
• Date created - the time and date when the motion detection was triggered.
• Component - internal software component that raised the fault for a motion detection alert. This is listed
as ANALYTICS.
• Severity - indicates how serious the fault is. Motion detection alerts are listed as 'Warning'.
• Detail - extra information that supplements the motion detection alert.
• Delete - remove the motion detection alert notification from the fault table.
Procedure 5-23 Display Event Log
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Event Logs from the Events and Actions menu.
The Event Log tab displays.
Triggered motion detection alerts are displayed.
Procedure 5-24 Delete Current Events
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Event Logs from the Event and Actions menu.
The Event Logtab displays.
3
Select the corresponding Delete check box to mark the motion detection alert for deletion.
OR
Deselect the corresponding Delete check box to keep the motion detection alert.
Note:
You can select the Select All check box to mark all motion detection alerts displayed in the list for
deletion.
4
Select Delete to delete the selected motion detection alerts.
You are prompted to confirm the deletion.
5
Select OK to confirm the deletion.
OR
Select Cancel.
62
- End -
- End -