Illustra IPS02D0OCWTT Configuration And User's Manual page 82

Session Timeout
ONVIF User Authentication
To utilize ONVIF User Authentication, there must be at least one admin level user in the ONVIF service.
Note:
When in Enhanced Security mode, editing ONVIF User Authentication requires the admin account password.
Procedure 8-20 Enable/Disable ONVIF User Authentication
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Remote Access from the Security menu.
The Remote Access tab displays.
3 Select the ONVIF User Authentication check box to enable ONVIF User Authentication.
OR
Deselect ONVIF User Authentication check box to disable ONVIF User Authentication.
The default setting is 'Enabled'.
Session Timeout
Session timeout specifies the number of minutes that a web session can remain idle before it is automatically
terminated.
Procedure 8-21 Set a Session Timeout time
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Session Timeout from the Security menu.
The Session Timeout tab displays.
3 Use the slider bar to select the Session Timeout (mins).
The default setting is 15 minutes.
82
- End -
- End -