Table of Contents
Advertisement
IEEE 802.1x
You will be prompted to confirm that you would like to upload the HTTPS certificate.
6
Select OK to confirm the upload.
OR
Select Cancel.
Delete a HTTPS Certificate
If you delete the existing certificate it will be replaced by a temporary substitute. The current browser session will
be lost and you will be required to log back in to the camera Web User Interface.
Procedure 8-12 Delete a HTTPS Certificate
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select HTTP/HTTPS from the Security menu.
3
Select Delete.
The camera will display a "Restarting HTTPS Service" page with a progress bar showing the deletion
progress.
4
When complete the camera will return to the log in page.
IEEE 802.1x
The IEEE 802.1x security feature provides port based network access control i.e. securing corporate networks
from the attachment of unauthorized devices.
Authentication is carried out through use of the Extensible Authentication Protocol or EAP. Both PEAP and TLS
methods are supported.
Procedure 8-13 Configure IEEE 802.1x Security
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select IEEE 802.1x from the Security menu.
The General tab is displayed.
3
Select the Enable IEEE802.1x checkbox to enable IEEE802.1x security .
OR
4
De-select the Enable IEEE802.1x checkbox to disable IEEE802.1x security.
5
Select the EAPOL Version from the drop-down menu.
6
Select the EAP Method using the radio buttons.
7
Enter the EAP identity name in the EAP Identify textbox.
77
- End -
- End -
Hide quick links:
Advertisement
Table of Contents
