Illustra IPS02D0OCWTT Configuration And User's Manual page 50

Event Actions
OR
Deselect the Enable check box to disable CIFS.
The default setting is 'Enabled'.
Note:
When in Enhanced Security mode, enabling CIFS requires the admin account password
5 Enter the network path in the Network Path text box.
6 Enter the domain name in the Domain Name in the text box.
7 Enter the username in the Username text box.
8 Enter the password h in the Password text box.
Event Actions
The camera can be commanded to carry out a specified operation when an analytic alert is triggered which are
defined using event actions. Up to 5 event actions can be configured on the camera.
Note:
Scheduled tasks, alarms and manual camera control always begin when they are selected or scheduled to start.
None of these camera actions have a priority over the other.
The event action can be used to configure any combination of the following actions:
• Record a clip to microSD Card.
• Send an external alarm via email that includes alarm detail, where to retrieve the AVI video file and one
JPEG picture of the event if recording MJPEG to microSD Card. If MJPEG is not being recorded on
microSD Card, then no JPEG picture is sent.
• Send an AVI video file to a pre-configured external FTP server. The video file contains pre and post
alarm video buffer.
Note:
A microSD Card must be inserted to send an SMTP email, video files and images from triggered analytic alerts.
Creating an Event Action
Configure an event action which can be triggered by an analytic alert.
Procedure 5-6 Create an Event Action
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
50
- End -