Table of Contents
Advertisement
Security Status
Note:
Any changes in the Security section, either changes to the Security Mode or to an individual protocol, are logged
in the Security Log.
Enhanced Security
Admin users can change the Security Mode of the camera from Standard Security to Enhanced Security.
Procedure 8-1 Enable Enhanced Security
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Security Status from the Security menu.
3
Select the Security Overview tab.
4
Check the Enable Enhanced Security check box to enable enhanced security
OR
Clear the Enable Enhanced Security check box to disable enhanced security.
Enhanced Security is disabled by default.
The Security Warning dialog appears.
5
Enter the current password in the Current Password text box.
6
Enter the new password in the New Password text box.
Note:
The password for enhanced security must meet the following requirements:
• Be a minimum of seven characters long
• Have at least one character from at least three of the following character groups:
7
Re-enter the new password in the Confirm Password text box.
8
Click Apply.
Note:
Any changes to the Security Mode are logged in the Security Log
71
• Upper-case letters
• Lower-case letters
• Numeric characters
• Special characters
- End -
Hide quick links:
Advertisement
Table of Contents
