Illustra IPS02D0OCWTT Configuration And User's Manual page 109

Encoding method
Standard compliance
Sampling rate
Sampling bits
Frequency response range
Dynamic Range
Input type
Input impedance
Input level
Input connector
Output type
Output connector
SNR
Distortion
Client interfaces
Browsers supported & version
illustra API version
ONVIF Profile S version
ONVIF test tool version
Special Features
Motion detection
Face detection
Higher compression quality ROI
Privacy zones
109
G711
G711
8 kHz
16
300-4,000 Hz
93dB
Electret Microphone single ended
20 kohm
2 V p-p typical
2 contacts on the 10-position terminal block
Mono, Single-ended output, 0.707VRMS to
2Vpp, into 16 ohm headphone, 10 KOhm
line output, 8 ohm 30mW Speaker Drive
2 contacts on the 10-position terminal block
Input 92dBA , Output: 102 dBA
Input THD= -94 dB; Output THD= -70 dB
IE 10 and 11. Firefox, Chrome
AD iAPI3
Core spec. version 2.4
Test tool version 14.06
ROIs defined by a 40x30 grid with no limit of
configured. Group or individually selectable
by draw and drag on the Web User Interface.
1 face detection region covering the full FoV.
Not adjustable.
Up to 5 user defined regions. Selectable by
draw and drag on the Web User Interface.
4 adjustable rectangular privacy zones