Table of Contents
Advertisement
Event Settings
Note:
SMTP settings must be configured to enable email alerts when using analytics.
Procedure 5-1 Configure SMTP Settings
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Event Settings from the Events and Actions menu.
3
Select the SMTP tab.
4
Select the Enable SMPT check box to enable SMTP.
Text boxes on the tab become available for entry
OR
Deselect the Enable check box to disable SMTP.
The default setting is 'Disabled'.
Note:
When in Enhanced Security mode, enabling SMTP requires the admin account password.
5
Enter the IP Address of the mail server in the Mail Server text box.
6
Enter the server port in the Server Port text box.
The default setting is '25'.
7
Enter the from email address in the From Address text box.
8
Enter the email address to send email alerts to in the Send Email to text box.
9
Select the Use authentication to log on to server check box to allow authentication details to be
entered.
OR
Deselect the Use authentication to log on to server to disable authentication.
The default setting is 'Disabled'.
10
If 'Use authentication to log on to server' check box has been selected:
a
Enter the username for the SMTP account in the Username text box.
b
Enter the password for the SMTP account in the Password text box.
11
Select Apply to save the settings.
Note:
Refer to Procedure 7-3 Test the SMTP Settings on page 7-74 to confirm that the SMTP settings are
working as expected.
47
- End -
Hide quick links:
Advertisement
Table of Contents
