Table of Contents
Advertisement
Analytics
Face Detection
Face Detection works by detecting human faces and ignoring other objects, such as trees or buildings. This
feature can be enabled or disabled and the required face orientation selected.
Procedure 5-14 Enable / Disable Face Detection
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Analytics from the Events and Actions menu.
The ROI tab is displayed.
3
To enable Face Detection on the camera:
a
Select the Enable Face Detection checkbox.
b
Select the Highlight Faces checkbox to enable
OR
Deselect the Highlight Faces checkbox to disable.
c
Select the Enhances Faces checkbox to enable.
OR
Deselect the Enhances Faces checkbox to disable.
d
Select the Face Orientation from the drop-down menu.
• Top
• Left
• Right
OR
Deselect the Enable Face Detection checkbox to disable Face Detection on the camera.
4
Select the required preconfigured action to be taken if a face is detected from the Action drop down
menu.
Motion Detection
Motion detection enables you to define a region of interest in the camera's field of view which can be used to
trigger an Event Action. Multiple areas of interest can be selected in the field of view but only one Event Action
may be triggered.
Motion Detection Best Practices
To ensure you get the highest quality results when using Motion Detection on the camera it is recommended that
you adhere to the following:
• An object exhibiting motion needs to be at least 8x8 pixels in size to be detected.
• The color of the object (in gray scale) should be approximately 10-15% different than the background.
• Exclude the Time Stamp region from motion detection, because the time stamp changes constantly and
could register as motion.
55
- End -
Hide quick links:
Advertisement
Table of Contents
