Security Status
Procedure 8-2 Disable Enhanced Security Mode
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Security Status from the Security menu.
3
Select the Security Overview tab.
4
Clear the Enable Enhanced Security check box to disable enhanced security.
Note:
When in Enhanced Security mode, changing the security mode requires the admin account password.
5
Click Apply.
Note:
Any changes to the Security mode are logged in the Security Log.
Setting Communication Protocols
This section explains how to modify the communication protocols that are used. The following communication
protocols can be enabled: HTTP, FTP, CIFS, Dyn DNS, SMTP, HTTPS, SNMP V3,and SFTP.
Procedure 8-3 Enable/Disable Communication Protocols
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Security Status from the Security menu.
3
Select the Security Overview tab.
4
Check/Clear the Communication Protocol check box to enable/disable the Communication Protocol.
5
Click Apply to save your settings.
Note:
• When in Enhanced Security, enabling/disabling individual protocols requires the admin
account password.
• Any changes to individual protocol settings are logged in the Security Log.
72
- End -