Table of Contents
Advertisement
SNMP
Procedure 9-6 Configure SMTP Settings
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select SMPT from the Network menu.
The SMPT tab displays.
3
Check the Enable SMPT check box to enable SMPT.
Text boxes on the tab become available for entry.
Note:
When in Enhanced Security mode, enabling SMTP requires the admin account password.
4
Enter the IP Address of the mail server in the Mail Server text box.
5
Enter the server port in the Server Port text box.
The default setting is '25'.
6
Enter the from email address in the From Address text box.
7
Enter the email address to send email alerts to in the Send Email to text box.
8
Select the Use authentication to log on to server check box to allow authentication details to be
entered.
OR
Deselect the Use authentication to log on to server to disable authentication.
The default setting is 'Disabled'.
9
If 'Use authentication to log on to server' check box has been selected:
a
Enter the username for the SMTP account in the Username text box.
b
Enter the password for the SMTP account in the Password text box.
10
Select Apply to save the settings.
SNMP
The camera introduces support for the Simple Network Management Protocol making it easier to manage on an IP
network.
The SNMP support includes support for V2 and V3. Using V2 means no authentication is required to access the
data and results are unencrypted. V3 offers enhanced encryption and authentication security features.
Procedure 9-7 Configure SNMP Settings
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select SNMP from the Network menu.
3
Enter a location reference in the Location text box.
87
- End -
Hide quick links:
Advertisement
Table of Contents
