Via Applicator - Endress+Hauser Proline Prosonic Flow 93 Operating Instructions Manual

Installation
28
3.6.3 Determining installation distances via Applicator
Applicator is a software application for selecting and planning flowmeters. The installation distances
required for installation can be determined without having to commission the transmitter
beforehand.
Applicator is available:
• On a CD-ROM for installation on a local PC  ä 95.
• Via the Internet for direct online entry www.endress.com  select country.
On the Internet site, select  Instruments Flow  Tooling Applicator. In the "Applicator
Sizing Flow" field, select the "Start Applicator Sizing Flow online" link.
Determining installation distances for clamp-on, measuring via one traverse
Determine the installation distances required via Applicator:
• Select the fluid.
• Select the device (e.g. 93P Clamp-on).
• Enter or select measuring point-specific values.
• Select the number of traverses: 1
• Read off the necessary installation distances:
– Wire length: __________
– Sensor distance: __________
Subsequent procedure
The sensors can be installed once the installation distances have been determined:
• Prosonic Flow P (DN 50 to 4000 / 2 to 160")  ä 37
• Prosonic Flow W  ä 41.
Determining installation distances for clamp-on, measuring via two traverses
Determine the installation distances required via Applicator:
• Select the fluid.
• Select the device (e.g. 93P Clamp-on).
• Enter or select measuring point-specific values.
• Select the number of traverses: 2
• Read off the necessary installation distances:
– Sensor position: __________
– Sensor distance: __________
Subsequent procedure
The sensors can be installed once the installation distances have been determined:
• Prosonic Flow P (DN 15 to 65 / ½ to 2½")  ä 39
• Prosonic Flow P (DN 50 to 4000 / 2 to 160")  ä 39
• Prosonic Flow W  ä 43.
Determining installation distances for insertion version, single-path measurement
Determine the installation distances required via Applicator:
• Select the fluid.
• Select the device (e.g. 93W Insert 1Ch).
• Enter or select measuring point-specific values.
• Read off the necessary installation distance:
– Sensor distance: __________
Subsequent procedure
The sensors can be installed once the installation distances have been determined:
• Prosonic Flow W  ä 46.
Proline Prosonic Flow 93 FOUNDATION Fieldbus
Endress+Hauser