Display (Operating Mode); Additional Display Functions - Endress+Hauser Proline Prosonic Flow 93 Operating Instructions Manual

Proline Prosonic Flow 93 FOUNDATION Fieldbus
Endress+Hauser
5.2.2

Display (operating mode)

The display area consists of three lines in all; this is where measured values are displayed, and/or
status variables (direction of flow, bar graph, etc.). You can change the assignment of display lines
to different variables to suit your needs and preferences ( see the "Description of Device
Functions" manual).
Multiplex mode:
A maximum of two different display variables can be assigned to each line. Variables multiplexed in
this way alternate every 10 seconds on the display.
Error messages:
Display and presentation of system/process errors  ä 75
S
Fig. 75: Typical display for standard operating mode (HOME position)
1 Main line: shows the main measured values
2 Additional line: shows additional measured variables and status variables
3 Information line: shows additional information on the measured variables and status variables, e.g. bar graph
display
4 "Info icons" field: icons representing additional information on the measured values are shown in this field
 ä 72.
5 "Measured values" field: the current measured values appear in this field
6 "Unit of measure" field: the units of measure and time defined for the current measured values appear in this field
5.2.3

Additional display functions

In the HOME position, you can use the O/S keys to call up a list containing the following
information:
• Totalizers (including overflow)
• Tag name (DEVICE PD-TAG)
OS  Scan of individual values within the Info Menu
X (Esc key)  Return to HOME position
4 5
+24.502
v
+1863.97
3
x
v
–50 +50
6
x
1
y
y
2
%
3
Operation
a0001173
71