Operation; Quick Operation Guide - Endress+Hauser Proline Prosonic Flow 93 Operating Instructions Manual

Proline Prosonic Flow 93 FOUNDATION Fieldbus
Endress+Hauser
5

Operation

5.1

Quick operation guide

You have a number of options for configuring and commissioning the device:
Local display (option)  ä 70
1.
The local display enables you to read all important variables directly at the measuring point,
configure device-specific parameters in the field and perform commissioning.
Operating programs  ä 76
2.
FOUNDATION Fieldbus functions and device-specific parameters are configured primarily via
the fieldbus interface. You can obtain special configuration and operating programs from
various manufacturers for these purposes.
Jumpers for diverse hardware settings  ä 78
3.
Jumpers on the I/O board provide the means of setting the following hardware parameters for
the FOUNDATION Fieldbus:
• Enabling/disabling the simulation mode in the Function Blocks (e.g. AI, DO Function Block)
• Switching hardware write protection on and off
1
XXX.XXX.XX
Esc
+
-
Fig. 73: FOUNDATION Fieldbus operating options
1 Local display for device operation in the field (option)
2A Configuration/operating programs for operating via the FOUNDATION Fieldbus (FF functions, device parameters)
2B Configuration/operating program for operation via the FXA193 service interface (e.g. FieldCare)
3 Jumper/miniature switches for hardware settings (write protection, simulation mode)
2A
FXA193
Esc
- +
E
E
Operation
2B
3
a0006391
69