Endress+Hauser Proline Prosonic Flow 93 Operating Instructions Manual page 36

Installation
36
4. Fix the sensor housing with the bracket.
!
Note!
– If necessary, the holder and sensor housing can be secured with a screw/nut or a lead-seal
(not part of the scope of supply).
– The bracket can only be released using an auxiliary tool.
Fig. 27: Fixing the sensor housing
5. Connect the connecting cable to the adapter cable.
This completes the mounting process. The sensors can now be connected to the transmitter via the
connecting cables  ä 61.
Proline Prosonic Flow 93 FOUNDATION Fieldbus
A0011528
Endress+Hauser