Software History - Endress+Hauser Proline Prosonic Flow 93 Operating Instructions Manual

Troubleshooting
114
9.10

Software history

Date Software version
06.2011 2.03.XX
06.2009 3.00.XX
01.2007 2.00.XX
05.2002 Communication module:
1.01.00
05.2002 Amplifier:
1.01.XX
06.2001 Amplifier:
1.01.XX
Proline Prosonic Flow 93 FOUNDATION Fieldbus
Changes to software
– Prosonic Flow W sensor (DN 15 to 65/½ to 2½")
– Liner informaton added to Quick Setup
– Additional ANSI pipes added to pipe standard
Introduction of new FOUNDATION Fieldbus I/O
board
Shorter execution times:
– Analog Input Function Blocks 1 to 8 (each 18 ms)
– PID Function Block (25 ms)
– Discrete Output Function Block (18 ms)
New function blocks:
– Arithmetic Function Block (20 ms)
– Input Selector Function Block (20 ms)
– Signal Characterizer Function Block (20 ms)
– Integrator Function Block (18 ms)
Software adaptations:
– ITK Version: 5.01
– CFF version: 1.8
Shorter execution times:
– Analog Input Function Blocks 1 to 8 (20 ms)
– Discrete Output Function Block (20 ms)
– PID Function Block (50 ms)
Software adaptations:
– ITK Version: 5.0
– CFF version: 1.7
Original software:
– Device Revision 1, DD Revision 1
– Certification No. IT 014600
– ITK 4.0
– 1 Resource Block
– 6 Transducer Blocks
– 8 Analog Input Blocks
– 1 Discrete Output Block
– 1 PID Block
– Output data
– Input data
– CFF Version: 1.5
Software adaptations:
Software supports the following fieldbuses:
– PROFIBUS
– FOUNDATION Fieldbus
Original software (without fieldbus support)
Operating Instructions
BA00078D/06/EN/14.10
71139009
BA00078D/06/EN/13.10
71121202
BA078D/06/en/01.07
71021607
-
-
-
Endress+Hauser