Installation Of Stool; Installation Of Traffic Signal Poles; Site Cable Installation - Siemens ST950 Plus+ User Manual

ST950 Plus+ User Manual

Installation of Stool

The Plus Controller can be mounted on one of three different stools.
+
For all relevant stool installation methods please refer to 667/CC/53060/000 – Siemens Mobility
Controller Cabinet Stool Installation Method Statement.

Installation of Traffic Signal Poles.

The installation of the street infrastructure is outlined in the following documents;
667/HE/20662/000 Installation & Commissioning – Signals & Poles

Site Cable Installation

Site Cable Installation
For all site cabling to be installed, the installer is to refer to the Plus+ STS drawing, site layout
design and configuration documentation. The STS drawing will contain
connection details and street furniture locations.
The design tool and the Plus
standards as set out in 667/DS/20664/048 - Traffic Signal Junction Cable Design & Certification for
ELV Systems.
In addition, the installer should confirm that the Plus
identified on the Completion Certificate.
Traffic Signal Installation Completion Certificate (667/HE/20664/004)
Prior to installation please confirm that the junction design engineer has completed the first
part and the second half as verification that the electrical design, including junction cabling,
is as required in Junction Cabling Design Guide.
If the installers have deviated from the Plus+ Layout Design (see next point), the installers
must sign off the second part to confirm the installation continues to meet regulations.
Additionally, ensure that the Site Layout Drawing Number and Revision are recorded on the
certificate.
ST950 Plus+ User Manual
Site Layout design has been developed such that it meets the
+
+
Page 104 of 176
667/HE/53000/000
Site Layout version provided matches that
all cable routes,
Issue 2
Unrestricted