Display Of Detailed Information On A Past Trip - Toshiba Tosvert VF-S15 Instruction Manual

(Continued)
Item displayed
Communication
Status
Parts replacement
alarm information
Note 8
Cumulative
Note 9
8
operation time
Number of starting
Default display
mode
8.2.2
Details on a past trip (of trips 1 to 8) can be displayed, as shown in the table below, by pressing the center of the
setting dial when the trip record is selected in the status monitor mode.
Unlike the "Display of trip information at the occurrence of a trip" in 8.3.2, details on a past trip can be displayed,
even after the inverter is turned off or reset.
Item displayed
Note 10
Past trip 1
Continuous trips
Panel LED
operated display
sl
m }}}}i



MODE

Display of detailed information on a past trip

Panel
LED display
operated


Communic
ation No.
The status of signal transmission and reception of
communication are displayed in bits.
FD57
}}
RX: signal receiving
receiving or transmitting
not receiving or not transmitting: 
The ON/OFF status of each of the cooling fan,
circuit board capacitor, main circuit capacitor of
parts replacement alarm, cumulative operation
time or number of starting are displayed in bits.
FE79
Number of starting
Cumulative
operation time
Main circuit
capacitor
The cumulative operation time is displayed.
FE14
(0.10=10 hours, 1.00=100 hours)
FD32 Number of starting (10000 times)
The output frequency is displayed (Operation at
60Hz).
Past trip 1 (displayed alternately)
For oca, ocl and err5 the number of times
(maximum of 31) the same trip occurred in succession
is displayed (unit: times). Detailed information is
recorded at the latest value.
H-4
E6581926
Description
sl }}
TX: signal
transmitting
: 
ON: 
m }}}}
i
OFF: 
Cooling fan
Control circuit board
capacitor
Description