Operation Command: Panel Operation
Ex.2
Frequency Command: Setting Dial 2
(1)
Wiring
MCCB
(2)
Parameter setting
Title
Command mode selection
Frequency setting mode selection 1
(3)
Operation
Run/stop: Press the
RUN
Frequency setting: Turn the setting dial to set the frequency.
To save the frequency setting, press the center of the setting dial.
and the set frequency will flash on and off alternately, then set frequency will
be retained.
The set frequency will be retained even if power supply is cut.
*1: Single-phase models are R/L1 and S/L2/N.
PO
PA/+
PB
R/L1
S/L2
T/L3
*1
Operation panel
Function
and
keys on the panel.
STOP
C-7
PC/-
Motor
U/T1
M
V/T2
W/T3
Setting value
1
3
E6581926
3