Toshiba Tosvert VF-S15 Instruction Manual page 293

■Mounting, wiring and removing of the option
 Do not connect any communication device other than applicable communication options to
the option adapter.
This can result in malfunction or accident.
Prohibited

The mounting/removing of option must be performed without supplying power(Turn off all
input power, wait at least 15 minutes, confirm that the charge lamp of inverter is no longer lit).
The inverter and option can become damaged.
Mandatory

Do not use tool for the mounting/removing of option .
Action
The inverter and option can become damaged.
After mounting option adapter, the depth of inverter is increased by 25.5mm
Note) Refer to Instruction Manual for option adapter (E6581838) about detailed specifications
3PH-200V 0.75kW inverter is shown in the picture.
■ Mounting of option
1) Insert option into option adapter.
Option adapter
Option
Note: Mount option adapter to inverter after
option insertion.
Insert the option straightly and slowly
along the guide inside option adapter.
Follow this instruction, the connecter
can become damaged.
3) Remove the option connector cover
on the front cover from the back side.
Option connector
cover
ST AT
US
RU N
PR G
MO N
R U N
S T O P
E A S Y
M O D E
Warning
2) Unlock the front cover and open it.
ST AT
US
RU N
PR G
MO N
R U N
S T O P
E A S Y
M O D E
4) Close the front cover and lock it.
ST AT
US
RU N
PR G
MO N
R U N
S T O P
E A S Y
M O D E
J-7
E6581926
10