Toshiba Tosvert VF-S15 Instruction Manual page 117

 How to use the guidance function
Here are the steps to follow to set parameters, using the guidance function. (When the Preset speed guidance
auf = 2)
Operation panel
action
MODE
6
MODE
MODE
MODE
If there is anything you do not understand during this operation, press the MODE key several times to start over from
he step of  display.
 or  is affixed respectively to the first or last parameter in each guidance wizard parameter group.
LED display
Displays the operation frequency (output stopped).
(When standard monitor display selection = is set to 0
00
[output frequency]).
The first basic parameter "History ()" is displayed.

Turn the setting dial to select the guidance function ().

Press the center of the setting dial to display .

Turn the setting dial to change to the setting value "".

Press the center of the setting dial to display the purpose-specific

guidance parameter group (refer to following table).
After moving to the purpose-specific guidance parameter group, use
* * * *
the setting dial to change the parameters.
 is displayed on completion of the setting of the guidance

parameter group.
Display of parameter
↓

Press the MODE key to exit the guidance parameter group.
↓
Thereafter, return to the default monitoring mode (display of output

frequency) by pressing the MODE key.
↓


F-6
E6581926
Operation
