Terminal Function Selection - Toshiba Tosvert VF-S15 Instruction Manual

6.7

Terminal function selection

6.7.1 Keeping an input terminal function always active (ON)
f104 : Always active function selection 1
f108 : Always active function selection 2
f110 : Always active function selection 3
 Function
This parameter specifies an input terminal function that is always to be kept active (ON).
[Parameter setting]
Title
f104 Always active function selection 1
Always active function selection 2
f108
Always active function selection 3
f110

Explanation of the coast stop function
When ST (Standby) is OFF, coast stops.
The default setting for ST (Standby) is ON. Please
change the following settings:
  (no function)
 Assign open input terminal 6: ST (Standby).
Coast stops if terminal set for ST (Standby) is set to
OFF. The monitor on the inverter at this time displays

Function
0-7, 10-153: Refer to section 11.6.
8,9: -
0-7, 10-153: Refer to section 11.6.
8,9: -
0-7, 10-153: Refer to section 11.6.
8,9: -
F-31
Adjustment range Default setting
0 (No function)
0 (No function)
Coast stop
Motor
speed
F-CC
ST-CC
E6581926
6
6 (ST)
ON
OFF
ON
OFF