Led Description - HP MSR 93 Series Installation Manual

Figure 86 Rear panel LEDs
(1) GE port status LED (yellow)
(4) ISDN B1 channel link status LED
(B1)

LED description

LED
System status
LED (SYS)
Network status
LED (INTERNET)
VPN status LED
(VPN)
3G status LED
(WWAN)
(2) GE port status LED (green)
(5) ADSL port status LED
Location Status
Off
Steady green
Flashing green
(8 Hz)
Flashing green
Front panel
(1 Hz)
Flashing yellow
(1 Hz)
Flashing yellow
(8 Hz)
Steady yellow
Off
Front panel
Steady green
Off
Front panel
Steady green
Off
Steady green
Flashing green
Front panel (8 Hz)
Steady yellow
Flashing yellow
(8 Hz)
Description
No power input, or exceptions have occurred on the
MPU.
The SDRAM is performing self-test.
The system software image is being copied and
decompressed.
Comware has started with the configuration file and
the router has booted up.
The SDRAM has failed the self-test.
The extended segment does not exist.
The system software image does not exist.
The router has not been connected to the network.
The router has been connected to the network.
A VPN link is present.
No VPN link is present.
No link is present or no network is available.
The router has been connected to the wireless
network and is operating in 3G mode.
Data is being received or transmitted. The router is
operating in 3G mode.
The router has been connected to the wireless
network and is operating in 2G mode.
Data is being received or transmitted. The router is
operating in 2G mode.
51
(3) ISDN link status LED (ACT)
(6) ISDN B2 channel link status LED
(B2)